Call on 01202 339559

GRW High Precision Ball Bearings

High precision ball bearings in grades up to ABEC 9 with bores from 1 to 30mm and comparable inch dimensions

Bearing Selector

Inch/Metric Bearing
Tolerance:
Desired Bore
Desired Outer Diameter
Material
Type
Closure

deep groove 2rs seal ball bearings

Metric Series

Bore

Ø (d)

Outer

Ø

(D)

Flange

Ø

(FD)

Open Width

(B)

Open Flange Width

(FB)

Radius (rs - min) (2)

2RS Seal

Part No

Shield Width (B1)

Load Rating Cr

(N)

Load Rating Cor

(N)

Limiting Speed (6) Nur (x 1000 rpm)

Ball Comple

ment Qty.: Z (5)

Ball Comple

ment Size:

Dw

4

13

15

5

1

0.2

6242RS

5.8

1.339

488

28

7

2.381

4

16

18

5

1

0.3

634D2RS

1.935

677

26

6

3.175

5

16

5

0.3

625D2RS

1.935

677

26

6

3.175

5

19

22

6

1.5

0.3

6352RS

6.8

2.522

1.057

22

8

3.175

6

19

22

6

1.5

0.3

6262RS

6.8

2.522

1.057

22

8

3.175

7

19

22

6

1.5

0.3

6072RS

6.8

2.522

1.057

22

8

3.175

7

22

25

7

1.5

0.3

6272RS

3.369

1.363

21

7

3.969

8

22

25

7

1.5

0.3

6082RS

3.369

1.363

21

7

3.969

9

24

7

0.3

6092RS

3.435

1.43

20

7

3.969

9

24

7

0.3

609D2RS

3.758

1.632

20

8

3.969

9

26

8

0.3

6292RS

4.698

1.982

19

7

4.763

10

26

8

0.3

60002RS

4.698

1.982

19

7

4.763

10

30

9

0.6

62002RS

6.1

2.6

18

7

5.556

10

30

9

0.6

6200D2RS

5.236

2.374

18

8

4.763

12

21

5

0.3

68012RS

1.93

900

19

12

2.381

12

24

6

0.3

69012RS

2.971

1.452

19

10

3.175

12

28

8

0.3

60012RS

5.237

2.359

31

9

3.969

12

32

10

0.6

62012RS

7.073

3.1

18

7

6

15

24

5

0.3

68022RS

2.08

1.1

18

14

2.381

15

28

7

0.3

69022RS

4.445

2.268

18

11

3.175

15

32

9

0.3

60022RS

5.676

2.819

17

9

4.763

15

35

11

0.6

62022RS

7.939

3.744

17

8

6

17

26

5

0.3

68032RS

2.24

1.27

17

16

2.381

17

30

7

0.3

69032RS

4.723

2.547

17

11

3.969

17

35

10

0.3

60032RS

6.172

3.267

17

10

4.763

17

40

12

0.6

62032RS

9.811

4.734

16

8

6.747

  1. Ball bearings without closure may be supplied with recesses. Please advise if you require bearings without recesses.
  2. rs min = minimum single bearing chamfer or maximum shaft or housing fillet radius.
  3. Not applicable to bearings with extended inner ring.
  4. Not applicable to flanged bearings.
  5. The number of balls may vary due to different types of retainer.
  6. See 'Limiting Speeds'.
  7. Tolerance of bore +12µm to +3µm. 
  8. Available in different width with closure.

Product By Industry

Today we serve a broad band of industry with a wide range of quality products.

Need a technical question answered?